RT105履带式滑移装载机

Rated Operating Capacity at 35% Tipping Load (kg): : 1,050 lbs. (2769)
Gross Power (kW): : 35 hp (26)
Lift Height (mm): : 109" (2769)

分类: 设备, 履带式滑移装载机

联系经销商

Performance

The Gehl RT105 Compact Track Loader is taking performance to the next level.

Tier IV-certified Yanmar diesel engines provide 35 hp (26 kW)
The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
Optional rear bumper/counterweight provides additional protection.
Thick steel plating and heavy-duty pins and strengthen the loader for extreme-duty work.
Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Height to Hinge Pin - Fully Raised (mm)	109" (2769)

Operator's Cabin

The extra-large, state-of-the art operator’s station on the RT105 Track Loader is designed for optimal operator comfort resulting in more productivity.

Cab forward design enhances the view to the bucket.
Level II FOPS is standard equipment.
Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
Optional pressurized sealed cab enclosure, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Controls

Controls on the Gehl RT105 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
Multi-purpose LCD display provides easy readout during operation.
Easy Manager Telematics

Engine

The RT105 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

Automatic glow module engine intake heating system provides superior cold-weather starting.
Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.

Make/Model	Yanmar/3TNV88C-KMS Tier IV
Type	4-Stroke Naturally Aspirated
Displacement/Cylinders (L)	100 cu.in. (1.64 L / 4)
Gross Power (kW) @ rpm	35 hp (26) @ 2800
Peak Torque (Nm) @ rpm	80 ft.-lbs. (109) @ 1820
Alternator Voltage/Amperage	12V/55A

Hydraulics

The RT105 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

Standard auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
New cast-iron pump design delivers efficient flow at higher temperatures.
Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
Direct engine coupling provides high operating efficiency.
Power track drive motors deliver superior pushing power.
Auxiliary hydraulic quick couplers for fast, efficient attachment changes.

Auxiliary Hydraulic Flow - Rated Speed (L/min)	14.5 gpm (55)
Transmission Pump Type	Axial Piston
Motor Type	Radial Piston

Attachment System

The RT105 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.

All-Tach® system manually engages and disengages with a single lever.
Both systems are compatible with all universal-style track loader attachments.

EDGE Attachments for RT105

Lift Arm

Gehl RT165 Compact Track Loader Hydraulics

The robust lift-arm on the RT105 Compact Track Loader is designed for optimal strength, visibility and capacity.

Additional reach and increased dump height result in more efficient load placement and overall performance.
Low-profile design provides outstanding forward, rear and side visibility.
Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.

Height to Hinge Pin - Fully Raised (mm)	109" (2769)
Reach - Fully Raised (mm)	26.5" (673.1)

Serviceability

Serviceability is very important to our customers. The RT105 is sure to exceed your service expectations.

Large, gas-spring assisted engine cover and over-sized allows full access on the rear of the machine for servicing and maintenance
Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
Track rollers and idlers are sealed and require no maintenance.
Coded wiring takes the guesswork out of electrical system identification.

PERFORMANCE
All-Tach Mounting System	标配
IdealTrax Automatic Track Tensioning System	标配
Straight Tracking	-
Power-A-Tach Mounting System	-
Selectable Self-Leveling Lift Action (Self-Level standard)	选配
Two-speed Hydrostatic Drive System	-
Horsepower Management System	-
Easy Manager Telematics	标配
ENGINE
Engine Alert System with Error Display	标配
Engine Automatic Shutdown System	选配
Glowplugs Starter Assist	标配
Dual-Element Air Cleaner with Indicator	标配
ECO Mode	-
HYDRAULICS
Auxiliary Hydraulics	标配
High-Flow Auxiliary Hydraulics	-
UNDERCARRIAGE
Elevated Planetary Final Drives	-
Single Flange Front/Dual Flange Rear Idlers	-
Rubber Track Undercarriage System	标配
Servo-Controlled Hydrostatic Drive	-
Dedicated Undercarriage	标配
STRUCTURE
Tilt-out Foot Pod	-
Back-up Alarm	标配
Combination Radiator & Hydraulic Oil Cooler	标配
ROPS/FOPS Level II Overhead Guard	标配
Anti-Vandalism Lock Provisions	标配
Mechanical Lift Cylinder Lock	标配
High Capacity Counterweight	标配

DIMENSIONS
A. Overall Operating Height – Fully Raised (mm)	143.7" (3650)
B. Height to Hinge Pin – Fully Raised (mm)	109" (2769)
C. Reach – Fully Raised (mm)	26.5" (673.1)
D. Dump Angle – Fully Raised	38°
E. Dump Height – Fully Raised (mm)	84" (2134)
F. Maximum Rollback Angle – Fully Raised	102°
G. Overall Height at ROPS (mm)	71.5" (1816)
H. Overall Length w/ Bucket – Std. c-wt. (mm)	117.5" (2985)
I. Overall Length w/o Bucket – Std. c-wt. (mm)	88.9" (2258)
J. Specified Height (mm)	57.7" (1466)
K. Reach at Specified Height (mm)	39" (991)
L. Dump Angle at Specified Height	72°
M. Maximum Rollback Angle at Ground	32°
N. Carry Position (mm)	5" (127)
O. Maximum Rollback Angle at Carry Position	32°
P. Digging Position – Below Ground (mm)	0" (0)
Q. Angle of Departure with Std. c-wt.	35°
R. Ground Clearance (mm)	7.5" (191)
S. Track Gauge (mm)	40.9" (1039)
T. Track Shoe Width (mm)	9.8" (250)
U. Crawler Base (mm)	50.5" (1283)
V. Overall Width – Less Bucket (mm)	50.8" (1290)
W. Bucket Width (mm)	54" (1372)
X. Clearance Radius – Front With Bucket (mm)	73" (1854)
Z. Clearance Radius – Rear w/ Std. c-wt. (mm) Maximum Rollback at Specified Height	50.8" (1290)
Maximum Rollback at Specified Height	72°
Angle of Approach	90°
Grouser Height (mm)	1" (25)
CAPACITY
Operating Capacity at 35% Tipping Load (kg)	1,050 lbs. (476)
Operating Capacity at 50% Tipping Load (kg)	1,500 lbs. (680)
Tipping Load (kg)	3,000 lbs. (1361)
Operating Weight (kg)	4,720 lbs. (2141)
ENGINE
Make/Model	Yanmar/3TNV88C-NMS2 Tier IV
Type	4-Stroke Naturally Aspirated
Displacement (L) / cylinders	100.2 cu. in./3 (1.642 L)
Gross Power (kW) @ rpm	34.7 hp (25.5) @ 2800
Net Power (kW) @ rpm	31.8 hp (23.7) @ 2800
Peak Torque (Nm) @ rpm	80.7 ft.-lbs. (109.4) @ 1820
Oil Pan Capacity (L)	6.2 qts. (5.87)
Alternator Voltage / Amperage	12V / 55A
TRACK DRIVES
Drawbar Pull / Tractive Effort (kg)	4,400 lbs. (1996)
Track Type / Track Rollers / Roller Type	Rubber / 4 / Steel
Track Width (mm)	9.84" (250)
Ground Pressure (bar)	4.8 psi (.33)
FORCES
Bucket Breakout – Tilt Cylinder (kg)	2,975 lbs. (1346)
Bucket Breakout – Lift Cylinder (kg)	3,042 lbs. (1376)
Ground Speed – Single Speed (km/hr)	6.3 mph (10.1)
Ground Speed – Two Speed (km/hr)	N/A
VOLUME
Fuel Tank (L)	9.5 gal. (36)
Hydraulic Reservoir Tank (L)	8 gal. (30)
Coolant Capacity (L)	1.75 gal. (6.62)
HYDRAULICS
Auxiliary Hydraulic Flow – Rated Speed (L/min)	14.5 gpm (55)
High-Flow Hydraulic Flow – Rated Speed (L/min)	N/A
Transmission Pump Type	Manual Tandem
Motor Type	Radial Piston
OTHERS
Battery Volts	12V
Cold Cranking Amps at Temperature	800 CCA @ 0°F (-18°C)